MPLS VPN 的基本配置 2

来源： 作者： 出处：Vlan9.com 2008-04-07 进入论坛

• 关 键 词：
• eigrp
• vpn

    Pulligny

Current configuration:
!
version 12.1
!
hostname Pulligny
!
!
ip cef
!
!
interface Loopback0
ip address 10.10.10.2 255.255.255.255
!
interface Serial0/1

no ip address
encapsulation frame-relay
random-detect
!
interface Serial0/1.1 point-to-point
description link to Pauillac
ip address 10.1.1.2 255.255.255.252
ip router isis
tag-switching ip
frame-relay interface-dlci 201
!
interface Serial0/1.2 point-to-point
description link to Pomerol
ip address 10.1.1.10 255.255.255.252
ip router isis
tag-switching ip
frame-relay interface-dlci 203
!
router isis
passive-interface Loopback0
net 49.0001.0000.0000.0002.00
is-type level-1
!
ip classless
!
end

Pauillac

version 12.1
!
hostname pauillac
!
ip cef
!
interface Loopback0
ip address 10.10.10.1 255.255.255.255
ip router isis
!
interface Serial0/0
no ip address
encapsulation frame-relay
no ip mroute-cache

tag-switching ip
no fair-queue
!
interface Serial0/0.1 point-to-point
description link to Pomerol
bandwith 512
ip address 10.1.1.1 255.255.255.252
ip router isis
tag-switching ip
frame-relay interface-dlci 102
!
interface Serial0/0.2 point-to-point
description link to Pulligny ip address 10.1.1.5 255.255.255.252
ip router isis
tag-switching ip
frame-relay interface-dlci 103
!
interface Serial0/0.3 point-to-point
description link to Pescara
bandwidth 512
ip address 10.1.1.13 255.255.255.252
ip router isis
tag-switching ip
frame-relay interface-dlci 104
!
router isis
net 49.0001.0000.0000.0001.00
is-type level-1
!
ip classless
!
end

#p#

检验
本节讲述了如何检查你的配置是否工作正常.
· show ip vrf - Verifies that the correct VRF exists.
· show ip vrf interfaces - Verifies the activated interfaces.
· show ip route vrf Customer_A - Verifies the routing information on the PE routers.
· traceroute vrf Customer_A 200.0.6.1 - Verifies the routing information on the PE routers.
· show ip bgp vpnv4 tag - Verifies the BGP.
· show ip cef vrf Customer_A 200.0.6.1 detail - Verifies the routing information on the PE  routers.

更多的排错命令详见： MPLS VPN Solution Troubleshooting Guide.
下面的输出是命令 show ip vrf 的结果
     Pescara#show ip vrf
     Name                         Default RD                             Interfaces
     Customer_A                100:110                              Loopback101
     Customer_B                100:120                              Loopback102

下面的输出是命令show ip vrf interfaces 的结果.
Pesaro#show ip vrf interfaces
   Interface                  IP-Address              VRF               Protocol
  Loopback101             200.0.6.1         Customer_A            up
  Loopback111             200.1.6.1         Customer_A            up
   Loopback102            200.0.6.1         Customer_B            up

下面的 show ip route vrf 命令的结果显示在2 个VPNl 里面都有相同的网段 200.0.6.0/24. 这是因为两个VPN客户 Customer_A 和Customer_B 使用了重叠的IP 地址.

Pescara#show ip route vrf Customer_A
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR

Gateway of last resort is not set
C 200.0.4.0/24 is directly connected, Loopback101
B 200.0.6.0/24 [200/0] via 10.10.10.6, 05:10:11
B 200.1.6.0/24 [200/0] via 10.10.10.6, 04:48:11

Pescara#show ip route vrf Customer_B
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is not set
C 200.0.4.0/24 is directly connected, Loopback102
B 200.0.6.0/24 [200/0] via 10.10.10.6, 00:03:24

在Customer_A 的2 个站点间使用Traceroute，可能可以看到MPLS 网络使用的label stack。
（如果配置mpls ip ttl .）
Pescara#traceroute vrf Customer_A 200.0.6.1
Type escape sequence to abort. Tracing the route to 200.0.6.1
1 10.1.1.13 [MPLS: Labels 20/26 Exp 0] 400 msec 276 msec 264 msec
2 10.1.1.6 [MPLS: Labels 18/26 Exp 0] 224 msec 460 msec 344 msec
3 200.0.6.1 108 msec * 100 msec
Note: Exp 0 是QoS 使用的一个字段

（责任编辑: 51CTO.com TEL：010-68476606) 更多请看Cisco与华为技术网（Vlan9.com）VPN技术、MPLS路由协议专题、SSL VPN详细知识介绍专题专题，或进入论坛讨论。